DESCRIPTION
HACK-AID-PLAST is a unique single pack polymeric solution that strengthens the bond between plaster and new and old concrete greatly.
USES
- Bond between concrete and plaster.
- Bond between concrete and ceramic / glaze tile.
ADVANTAGES
- HACK-AID-PLAST holds the concrete tightly due to interaction polymerisation.
- As the concrete cures, the bond strength also increases.
- Non-ionic, no possibility of attack on concrete by chlorides, alkalis, sulphates, etc.
- It does not have any corroding or deteriorating effect on the reinforcement steel.
- The bond between steel and concrete is also preserved by HACK-AID-PLAST.
- Laboratory tests reveal that the force required to pull out HACK-AID-PLAST aided plaster is twice the force required to detach ordinary plaster. (Hack-Aid-Plast not used)
- In general, in many repair cases gunniting does not last due to inadequate bond. This may be easily remedied by HACK-AID-PLAST. Use of HACK-AID-PLAST as a bonding layer before gunniting reduces the rebound loss.
INSTRUCTIONS FOR USE
- Clean the surface with water jet thoroughly to remove dirt, loose, particles etc.,
- Moisten the surface with water.
- On the entire clean moist surface, apply a coat of HACK-AID-PLAST by spray.
- When surface becomes tacky, apply a chat / dash-coat of cement mortar, say in 10 minutes.
- Tacky period may vary depending on external atmospheric conditions, saturation degree of substrate etc. Check and ensure that the surface is tacky prior to application.
- Plaster the surface or place the concrete in the usual manner after setting of the chat/ dash coat.
COVERAGE
10 m2 / L on a fairly smooth surface when applied by spray.
PRECAUTIONS
- Make sure that the entire surface to be plastered is covered with Hack-Aid-Plast.
- Clean all brushes, sprayers, etc. with water immediately after use
PACKING
1, 5, 20 kgs. HDPE containers.
STORAGE AND SHELF LIFE
It has a shelf life of 12 months when stored in original container in a cool, dry place.
|
