DESCRIPTION
POLYCOAT TST (S) is a unique solvent based, room temperature moisture curing reactive silicone water repellent. It is ready to use liquid. When applied on porous substrates, it forms a transparent protective layer, that protects substrate from ingress of water, and water borne aggressive agents.
SALIENT FEATURES
- Ready to use, single component forms transparent coating.
- Does not change the appearance of substrate, when applied on painted surface.
- Prevents ingress of water borne chlorides and sulphates.
- Suitable for indoor and outdoor use.
- Protects surfaces from discoloration and pollution.
- Simple spray application
APPLICATIONS
- Exterior cleaned, painted concrete surfaces.
- Concrete block works
- Pavers, bricks.
- Asbestos sheet and wood etc
DIRECTIONS FOR USE
Always test product on a small area first & allow a 24 hours cure time to determine the ease of application & desired results.
Clean surface to be treated so that it is free from dirt, dust and other contaminants that could prevent POLYCOAT TST (S) penetration. Shake the content before application. Apply POLYCOAT TST (S), on prepared surface by using low pressure sprayer, brush, or roller etc. Allow to cure min. 6 to 8 hours. During curing period surface should not be exposed to water or any solvent.
COVERAGE
One liter POLYCOAT TST (S) will treat approximately 80 sq. ft. of normal concrete surface, depending on the porosity of the surface.
PACKING
1, 5, 20, 200 ltrs. in HDPE/ MS containers.
STORAGE AND SHELF LIFE
It has a shelf life of 6 months when stored in original packing in a cool, dry place. |
