Sunepoxy SL Underlay
SUNEPOXY SL UNDERLAY
SUNEPOXY SL UNDERLAY is a three-component pigment epoxy-based flooring consisting of an epoxy base and amine curing agent, and chemically inert graded quartz (aggregate) fillers. It is a self-leveling composition and forms very smooth, attractive, hygienic, hard-wearing, and chemically resistant epoxy flooring.
ADVANTAGES
- Easy to apply. Flowable consistency for self-leveling application.
- Non-shrink and solvent free.
- Provides excellent adhesion to many surfaces including concrete and metal substrate.
- Excellent resistance to chemicals.
- Superior abrasion resistance.
- Nuclear grade.
TECHNICAL DATA
| Technical Parameters | Range/Value |
|---|---|
| Base | Interpenetrating polymer network-based phenolic epoxy. |
| Shelf Life | 12 months in a tightly sealed container at 25°C. |
| Cleaning | Thinner. |
SIMPLE STEPS TO APPLY SUNEPXOY SL TOPCOAT
Pour The Material
The material should be poured onto the prepared and rimed substrate as soon as mixing is complete. It should be spread to the required thickness using a serrated trowel; with care taken not to overwork the resin, spreading evenly and slowly.
Roll The Material
Immediately after laying, the material should be rolled, using a spiked nylon roller, to remove slight trowel marks, and to assist air release. The rolling should be carried out using a 'back and forth' technique along the same path.
Overlap Of 50% Is Recommended
An overlap of 50% with adjacent paths is recommended. Further light rolling may be required to remove surface imperfections, or for subsequent release of trapped air, but should be done prior to the setting of the product.
SIMPLE STEPS TO APPLY SUNEPXOY SL TOPCOAT
Pour The Material
Roll The Material
The material should be poured onto the prepared and rimed substrate as soon as mixing is complete. It should be spread to the required thickness using a serrated trowel; with care taken not to overwork the resin, spreading evenly and slowly.
Immediately after laying, the material should be rolled, using a spiked nylon roller, to remove slight trowel marks, and to assist air release. The rolling should be carried out using a 'back and forth' technique along the same path.
Overlap Of 50% Is Recommended
Overlap Of 50% Is Recommended
Apply 2nd coat at same coverage after 4-6 hour interval. For higher thickness, additional coats may be applied. Surfaces with higher porosity may be primed with two coats of primer.
CLIENTS WE SERVED SUCCESSFULLY
