Sunflorshine
SUNFLORSHINE
SUNFLORSHINE is a transparent, non-toxic water-based co-polymer formulation of penetrating concrete hardeners. This penetrating treatment reacts with concrete and masonry to form a permanent crystalline structure, thereby improving the hardness, durability, and abrasion resistance of the treated surface.
ADVANTAGES
- Excellent strengthening abrasion resistance and dust proofing.
- Easy to apply, rapid curing, fast turnaround time, treated floors can be used immediately.
- Seals micro-channels in concrete against chemical attack.
- Safe, non-toxic, non-VOC volatile, non-flammable.
- Improves sheen and stain resistance to concrete. Oil repellent and water repellent.
- Eliminates high maintenance costs.
- Anti-dust.
- Breathable and UV stable. Will not discolour, peel or flake.
- VOC-compliant, non-toxic, non-flammable, and low odor.
- Eliminates the need for floor waxes, liquid polish, and conventional resin-based coatings.
TECHNICAL DATA
| Technical Parameters | Range/Value |
|---|---|
| Appearance | Semi-transparent liquid. |
| Coverage on power-troweled surfaces | 10-12 2 /kg/coat. |
| Shelf Life | 12 months in a tightly sealed container at 25°C. |
| Cleaning | Thinner. |
Simple steps to apply Sunflorshine
Apply A Coat Of Suflorshine
Apply a single coat of SUNFLORSHINE with low pressure, high volume sprayer or rollers or brush, or fine/soft-bristled broom so as to form a glistening sheen and to ensure complete saturation of the surface. Enough SUNFLORSHINE shall be applied to keep the surface wet for 20 minutes.
Apply Three Coats
Install to a thickness of 4-9mm, depending on the job requirements.
The Floor Is Ready Use
The floor is ready to use after the surface is dry. Any dry powder residue must be removed.
Ready To Use
The floor is typically ready for use 1 hour after final burnishing is carried out.
Simple steps to apply Sunflorshine
Apply A Coat Of Suflorshine
The Floor Is Ready Use
Apply a single coat of SUNFLORSHINE with low pressure, high volume sprayer or rollers or brush, or fine/soft-bristled broom so as to form a glistening sheen and to ensure complete saturation of the surface. Enough SUNFLORSHINE shall be applied to keep the surface wet for 20 minutes.
The floor is ready to use after the surface is dry. Any dry powder residue must be removed.
Apply Three Coats
Ready To Use
Install to a thickness of 4-9mm, depending on the job requirements.
The floor is typically ready for use 1 hour after final burnishing is carried out
CLIENTS WE SERVED SUCCESSFULLY
