SUNEPOXY SL TOPCOAT is three component pigment epoxy-based self-leveling floor topping consisting of a base, hardener, and quartz fillers supplied. It provides an aesthetic, smooth, monolithic, light reflective surface when laid on the floor.
The material should be poured onto the prepared and rimed substrate as soon as mixing is complete. It should be spread to the required thickness using a serrated trowel; with care taken not to overwork the resin, spreading evenly and slowly.
Immediately after laying, the material should be rolled, using a spiked nylon roller, to remove slight trowel marks, and to assist air release. The rolling should be carried out using a 'back and forth' technique along the same path.
An overlap of 50% with adjacent paths is recommended. Further light rolling may be required to remove surface imperfections, or for subsequent release of trapped air, but should be done prior to the setting of the product.