SUNFLORSHINE is a transparent, non-toxic water-based co-polymer formulation of penetrating concrete hardeners. This penetrating treatment reacts with concrete and masonry to form a permanent crystalline structure, thereby improving the hardness, durability, and abrasion resistance of the treated surface.
Technical Parameters | Range/Value |
---|---|
Appearance | Semi-transparent liquid. |
Coverage on power-troweled surfaces | 10-12 2 /kg/coat. |
Shelf life | 12 months in a tightly sealed container. |
Cleaning | Soap and water. |
Apply a single coat of SUNFLORSHINE with low pressure, high volume sprayer or rollers or brush, or fine/soft-bristled broom so as to form a glistening sheen and to ensure complete saturation of the surface. Enough SUNFLORSHINE shall be applied to keep the surface wet for 20 minutes.
The floor is ready to use after the surface is dry. Any dry powder residue must be removed.
Install to a thickness of 4-9mm, depending on the job requirements.
The floor is typically ready for use 1 hour after final burnishing is carried out.