FLEXITOP POLYUREA-H is a two-component, hybrid polyureapolyurethane applied liquid waterproofing elastomeric membrane. Fully cured FLEXITOP POLYUREA-H has excellent chemical, mechanical, UV, and weather resistance properties.
Technical Parameters | Range/Value |
---|---|
Cure Time (at 27°C) | Gel Time - 15 minutes | Tack Free Time - 2 hours | Full Cure Time - 7 days. |
Colour | Part A - Reddish Brown, Part B - Light Yellow Transparent Liquid. |
Storage & Shelf Life | 6 months shelf life stored in cool dry place at 25°C. |
Cleaning | Thinner. |
Open Flexitop Polyurea-H Part A and part B container. Stir individual containers separately very well to get a homogeneous mixture.
Add Part A and Part B proportionally, as given in the technical datasheet, stir it well using a handheld low rpm (200 - 300) stirrer for about 2-3 minutes until the mixture becomes uniform.
Apply the mix as a base coat on the well-primed surface using an airless spray gun, roller, or brush at the rate of 0.4-0.5kg/m2.
Apply 2nd coat at same coverage after 4-6 hour interval. For higher thickness, additional coats may be applied. Surfaces with higher porosity may be primed with two coats of primer.