Flexitop Polyurea H
FLEXITOP POLYUREA-H
FLEXITOP POLYUREA-H is a two-component, hybrid polyureapolyurethane applied liquid waterproofing elastomeric membrane. Fully cured FLEXITOP POLYUREA-H has excellent chemical, mechanical, UV, and weather resistance properties.
ADVANTAGES
- Excellent chemical resistance, thermal stability, and UV resistance (some discolouration will occur).
- Speedy turn-around time.
- Tremendous impact, abrasion, and puncture resistance.
- Seamless and monolithic, including field joints.
- Significantly enhances the durability of reinforced concrete.
- Applicable even on the irregular surface.
- Low permeability values.
- Good anti-rooting properties.
- It can be applied at ambient temperatures from -30°C to 70°C.
- Anti-root properties.
- Easy to apply.
- Excellent flexibility under low temperatures.
TECHNICAL DATA
| Technical Parameters | Range/Value |
|---|---|
| Cure Time (at 27°C) | Gel Time – 15 minutes | Tack Free Time – 2 hours | Full Cure Time – 7 days. |
| Colour | Part A – Reddish Brown, Part B – Light Yellow Transparent Liquid. |
| Storage & Shelf Life | 6 months shelf life stored in cool dry place at 25°C. |
| Cleaning | Thinner. |
Simple steps to apply Flexitop Polyurea H
Open Flexitop Polyurea-H
Open Flexitop Polyurea-H Part A and part B container. Stir individual containers separately very well to get a homogeneous mixture.
Add Part A And Part B
Add Part A and Part B proportionally, as given in the technical datasheet, stir it well using a handheld low rpm (200 - 300) stirrer for about 2-3 minutes until the mixture becomes uniform.
Apply The Mix As A Base Coat
Apply the mix as a base coat on the well-primed surface using an airless spray gun, roller, or brush at the rate of 0.4-0.5kg/m2.
Apply 2nd Coat At Same Coverage
Apply 2nd coat at same coverage after 4-6 hour interval. For higher thickness, additional coats may be applied. Surfaces with higher porosity may be primed with two coats of primer.
Simple steps to apply Flexitop Polyurea H
Open Flexitop Polyurea-H
Add Part A And Part B
Open Flexitop Polyurea-H Part A and part B container. Stir individual containers separately very well to get a homogeneous mixture.
Add Part A and Part B proportionally, as given in the technical datasheet, stir it well using a handheld low rpm (200 - 300) stirrer for about 2-3 minutes until the mixture becomes uniform.
Apply The Mix As A Base Coat
Apply 2nd Coat At Same Coverage
Apply the mix as a base coat on the well-primed surface using an airless spray gun, roller, or brush at the rate of 0.4-0.5kg/m2.
Apply 2nd coat at same coverage after 4-6 hour interval. For higher thickness, additional coats may be applied. Surfaces with higher porosity may be primed with two coats of primer.
CLIENTS WE SERVED SUCCESSFULLY
