Suncrete PU MF
SUNCRETE PU MF
SUNCRETE PU MF is a three-component polyurethane-concrete flooring system. This is a monolithic trowel system applied.
SUNCRETE PU MF floors are extremely tough and have physical properties exceeding typical concrete and it has high impact resistance and withstands abrasive wear and a broad spectrum of chemicals.
ADVANTAGES
- Easy to apply. Fast curing, therefore, minimizes downtime.
- Excellent resistance to a wide range of chemicals.
- Excellent abrasion resistance.
- It provides a dense, impervious, seamless floor surface that can be easily cleaned.
- Available in a select range of colours to enhance the working environment.
TECHNICAL DATA
| Technical Parameters | Range/Value |
|---|---|
| Base | Polyurethane resin. |
| Colour | Select industrial shades. |
| Finish | Matte. |
| Shelf Life | 6 months in a tightly sealed container at 25°C.. |
Simple steps to apply SUNCRETE PU MF
Install SUNCRETE PU MF
Install SUNCRETE PU MF cove base as required.
Install A Thickness
Install to a thickness of 4-9 mm, depending on the job requirements.
Apply The Material
Screed or trowel apply the mixed material onto the floor.
An Overlap Of 50% Is Recommended
An overlap of 50% with adjacent paths is recommended. Further light rolling may be required to remove surface imperfections, or for subsequent release of trapped air, but should be prior to the setting of the product.
Simple steps to apply SUNCRETE PU MF
Install SUNCRETE PU MF
Apply The Material
Install SUNCRETE PU MF cove base as required.
Screed or trowel apply the mixed material onto the floor.
Install A Thickness
An Overlap Of 50% Is Recommended
Install to a thickness of 4-9 mm, depending on the job requirements.
An overlap of 50% with adjacent paths is recommended. Further light rolling may be required to remove surface imperfections, or for subsequent release of trapped air, but should be prior to the setting of the product.
CLIENTS WE SERVED SUCCESSFULLY
